Categories

System glitches and false alarms can be exasperating, and more importantly, might prevent your security system from working the way it should. Luckily, most issues, from false alarms to dead batteries, are simple to fix. Take a look at our suggestions for troubleshooting your home alarm system in Riverside. We’ll help you keep your household shielded and your system operating properly.

Test Your Home Security System In Riverside

One great way to troubleshoot your property’s security is to test it! Modern systems permit you to place them in test mode to prevent you from prompting an emergency response from monitoring agents. After switching to test mode, take these steps:

• Turn on your system as you normally would when you exit your home.
• Open a window or door protected by a contact sensor, or test other sensors. Close the door or window once you’re finished so it doesn’t prompt the alarm when you reactivate the system.
• Let the alarm sound for 60 seconds to ensure communications with the security provider and to create an entry in the alarm system log.
• Proceed to test devices as needed
• Review the alarm’s activity log to confirm that everything’s working.

Rest assured, monitoring specialists can tell that your alarm system is being tested. Just make sure to switch out of test mode when done. It’s smart to test every other month or whenever you change your home’s phone or internet service.

Evaluate The Positioning And Condition Of Motion Sensors

Although an crucial part of your alarm system, motion detectors are prone to false alarms. Do your part to prevent them with some simple troubleshooting.

• Conduct a visual inspection. Are there things that could move within range of the sensor, like a curtain taken by a breeze?
• Is the sensor dirty? Dirt, cobwebs, and debris can cause malfunctions. Check to confirm the face is clean.
• Does the motion detector offer pet immunity you can turn on? Some can be configured to ignore pets weighing as much as 100 pounds.
• When was the battery replaced? Low batteries can affect performance or lead to false alarms.
• Is the sensor facing a source of heat? Too much heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Watch Out For Low Battery Notifications

One helpful aspect of modern home security systems is that they’ll alert you when batteries are running low. If your system is equipped with a mobile app or control panel, you’ll typically discover notifications there. Depending on your system, you might detect an intermittent beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that will have to be replaced every so often. It’s a good idea to keep batteries ready and establish a replacement schedule. Top systems also include a rechargeable backup battery for the main control panel. This backup battery keeps your system running if you lose power and should recharge once power is back online. If it doesn’t, you should replace it.

Troubleshooting Is Easy With ADT Home Security In Riverside 

As the top name in home security, ADT designs systems that offer superior functionality and protection. Getting into test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always get alerts when a battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system perfect for your Riverside home and family. Place a call to (951) 253-3041 or submit our form today!